Honda Vehicle Owner's Manual page 54

06/10/30 16:48:52 32SJD620_054
ATTACHING CLIP
ANCHOR FITTING
On some models
Lift the head restraint, then route
the tether strap over the seat-back
and through the head restraint legs.
ATTACHING
CLIP
ANCHOR FITTING
8. Tighten the tether strap according
to the child restraint system
maker's instructions.
Installing a Child Restraint System
9. Push and pull the child restraint
system forward and from side-to-
side to verify that it is secure.
The design and suitability of the
child restraint systems must be
carefully checked with the child
restraint system manufacturer
concerned and the seller of those
systems. If you are not sure, consult
your dealer before purchasing this
type of child restraint system.
Driver and Passenger Safety
51