Finding The Beginning Of A Tune - JVC KW-XC888 Instructions Manual

To fast-forward and rewind a tape
Press ¢
second to fast-forward the tape.
When the tape reaches its end,
the tape is reversed and
playback starts from the
beginning of the other side.
Corrent tape direction
Press 4
second to rewind the tape.
When the tape reaches its end,
playback of the same side starts.
Corrent tape direction
To stop fast forward or rewind at any position
on the tape, press TAPE (PROG).
Tape play starts from that position on the tape.
Note:
When the tape reaches its end while fast-forwarding,
the tape direction will be changed automatically.
12
for more than 1
for more than 1
Finding the beginning of a
tune
Multi Music Scan allows you to automatically
start playback from the beginning of a specified
tune. You can specify up to 9 tunes ahead of or
before the current tune.
During playback
Specify where (how many tunes ahead of or
before the current tune) the tune you want is
located.
Press ¢
locate a tune ahead of the
current tune on the tape.
Press 4
locate a tune before the current
tune on the tape.
When the beginning of the specified tune is
located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback
starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is
reversed and played from the beginning of the
other side.
• In the following cases, Multi Music Scan may not
operate correctly:
– Tapes with tunes having long pianissimo
passages (very quiet parts) or non-recorded
portions.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
tunes.
repeatedly to
repeatedly to