Bully Dog Power Pup Installation Manual page 6

INSTALLATION STEPS
SCREEN.OPTIONS
PTO CONTROLER
This feature is only available on '03-'05 vehicles. The PTO Controler is an accessory tool that makes it possible
to raise and lower the vehicles idle RPMs. The PTO can be used to run accessory PTO devices such as winches
and generators.
USING THE PTO:
Once the PTO Controler is selected from the main menu the vehicle can be started, then press "Y" on the
downloader face to activate the process. Use the up and down arrows on the downloader face plate in-
crease or decrease the engine RPMs by increments of 100 RPMs up to 1900 RPMs. When finished using the
PTO Control, press "N" to stop the process and press "N" once more to exit.
RETURNING TO STOCk:
Plug in the downloader and select the download option from the main menu. Once in the power level selec-
tion menu, highlight 0 and press "Y". Then follow the instructions set out on the downloader. When finished,
the downloader will have returned the vehicle to stock power level with the speed limiter intact and the
transmission shift patterns to stock.
DTC FUNCTION (
Diagnostic Trouble Code
Once selected from the main menu the DTC
function will display all diagnostic trouble
codes on your vehicle. This function allows
you to read and erase trouble codes off of the
vehicles ECU. To erase DTCs, simply press "Y"
and all DTC codes will be erased. If no DTCs are
displayed then just unplug the downloader
and cycle the key.
5
)