Storing Dab Services In Memory - JVC KS-FX722R Instructions Manual

To change the display information while
tuning into an ensemble
Normally service name is shown on the display.
If you want to change the display information, press
DISP.
Each time you press the button, the following
information appears on the display for a while.
Service name
Ensemble name
Channel number
Band/Preset number
To tune into a particular ensemble without
searching:
1 Press and hold DAB (FM AM) to select DAB
tuner as the source.
2 Press DAB (FM AM) repeatedly to select the
DAB band (DAB1, DAB2 or DAB3).
3 Press and hold ¢
than 1 second.
4 Press ¢ or 4
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
To restore the FM/AM tuner
Press and hold DAB (FM AM) again.
Clock time
Frequency
or 4
for more
repeatedly until the
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
2
Select the DAB band (DAB1, DAB2
or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
DAB1
3
Tune into an ensemble you want.
4
Select a service of the ensemble you
want.
MO
Press RND (5) to select the
next service.
Press RPT (∞) to select the
previous service.
CONTINUED ON THE NEXT PAGE
DAB FM/AM
DAB2 DAB3
27