Selecting A Base To Use - BT Studio 1100 User Manual

On the base:
7. Press and hold
Page
mode.
The base beeps and the In use light flashes while the
handset is registered.
Once registered you will hear a confirmation tone and
the next available handset number is allocated and
shown in the display.

Selecting a base to use

If your handset has been registered to more than one
base you can select which one it uses.
1. Press .
Menu
2. Press or until
Vol
press .
Menu
3. Press or until
Vol
press .
Menu
4. All bases that your handset is registered to will be
BASE 1 2 3 4
displayed, e.g.
The base that you are currently registered to will flash.
5. Enter the number of the base you want to use.
BT Studio 1100 – Edition 4 – 28.06.04 – 5874
to put the base into registration
REGISTER is displayed then
SELECT BASE is displayed then
.
Using additional bases
If registration is unsuccessful, after
1 minute, the handset will display
the list of registered bases and you
can try again or select another
base to use.
If you are in an environment
where there is a lot of electrical
interference you may experience
difficulty registering to a base.
41