Lake LM Series Operation Manual page 13

Dynamic Function Buttons with LEDs (Right of LCD)
The function of these buttons change according to the currently selected view or menu.
The right bi-color LED in the top button illuminates red or yellow to indicate faults or warnings. If this button
is pressed while in Home View, and with the Lake Controller on the Home page or the Modules Menu, the
associated Module/s of the selected frame will be highlighted in the Controller (Module B in Contour Mode,
or Modules C&D in Mesa Mode).
The three LEDs on the left side of each button illuminate white when an associated option is available on
the LCD screen.
Please refer to chapter 6 for further details.
Rotary Encoder
The rotary encoder is used to modify various parameters (e.g. input level) via the menu. When a menu item
is selected that permits adjustment of parameter values, the ring around the rotary encoder illuminates. In
Home View the encoder can be used to scroll through the Meter Views.
Dynamic Illuminated I/O Divider
The dynamic illuminated divider moves position to indicate the split between inputs and outputs for meter-
ing and mute purposes in the two different modes of configuration. Contour Mode provides two Module
inputs, and six Module outputs; Mesa Mode provides four Module inputs and four Module outputs.
The LED meters and mute buttons to the left of the illuminated divider relate to the Module inputs; the LED
meters and mute buttons to the right of the divider relate to the Module outputs.
The I/O divider is not illuminated in I/O Status View as all eight LED meters and associated mute buttons are
used for Input Router signal and mute functionality.
Module Input / Output Mute Buttons and LED Meters
Independent mute buttons and LED meters are provided for the Module inputs and outputs. The number of
inputs and outputs varies depedning on processor and module configuration. Refer to the description above
regarding the Dynamic Illuminated I/O Divider.
The LED meters for each channel are split into five segments: The bottom three segments (green) indicate
signal; the 4th segment (yellow) indicates signal 2 dB below clipping; and the 5th segment (red) indicates
signal clipping.
The embedded LED in each mute button confirms whether the associated Module input/s or output/s are
muted (red), unmuted (white), associated input router is muted (pink), or unused (not illuminated).
Please refer to section 6.8 for further information.
Lake LM Series Operation Manual Rev 1.3.5
Product Overview
7