SCM Microsystems @MAXX lite Reference Manual page 34

@MAXX R
LITE EFERENCE
}
else
{
}
ret = SCardReleaseContext(ContextHandle);
}
else
{
printf("\n SCardEstablishContext failed with %.8lX",ret);
}
printf("\npress any key to close the test tool\n");
getch();
}
M
ANUAL
ret = SCardDisconnect(CardHandle, SCARD_RESET_CARD);
ret = SCardConnect(ContextHandle,
/* get actual 848KBPS status: ON/OFF */
InBufLen = 2;
InWord = CCID_GET_848KBPS_STATUS;
ret = SCardControl(CardHandle, IOCTL_CCID_ESCAPE,
printf ("\n Get 848KBPS status: %lx: %.2x", ret,OutByte);
Reader[0].dwCurrentState = SCARD_STATE_UNAWARE;
Reader[0].dwEventState = SCARD_STATE_UNAWARE;
Reader[0].szReader = ReaderName[0];
ret = SCardGetStatusChange(ContextHandle, MINTIMEOUT, Reader, 1);
printf ("\nATR: ");
for (i=0; i<Reader->cbAtr; i++)
{
printf ("%.2x ",Reader->rgbAtr[i]);
}
printf ("\n----------------------------------------------\n");
ret = SCardDisconnect(CardHandle, SCARD_RESET_CARD);
printf("\n SCardConnect failed with 0x%.8lX",ret);
ReaderName[0],
SCARD_SHARE_SHARED,
SCARD_PROTOCOL_T0 | SCARD_PROTOCOL_T1,
&CardHandle,
&ActiveProtocol);
&InWord, InBufLen,
&OutByte, 1, &ResLen);
34