Hoover Mode User Manual page 7

17. Before vacuuming, remove any large or shaft
objects from the floor or cleaning surface in
order to prevent damage to the filter.
18. If the air inlet, floor head or the telescopic tube
is blocked, switch off the cleaner straight away
and remove from the Mains power. First clear the
blocked object before attempting to start the
cleaner vacuum again.
19. Hold the plug when rewinding onto the cord
reel. To prevent accidental injury do not allow
the plug to whip when rewinding.
20. Do not extend the power cable beyond the
yellow mark.
21. Do not leave the appliance unattended when it
is connected to a Mains power supply.
22. Before carry out any maintenance service
or cleaning the filters, always switch off the
vacuum cleaner and disconnect the plug from
power supply
23- Keep ends of the hose, telescopic tube and other
openings away from your face and body.
24. Do not use the vacuum cleaner if it is damaged
or breaks down. Check the electrical regularly
for defects. If connection cables, electrical
hoses, electrical contacts and electric tubes are
damaged, have them replace immediately.
Never
25. clean the vacuum cleaner or any of
the electrical parts, especially the electrical
connections with water or liquid cleaners.
26. Never attempt to make any modifications
electrically to the vacuum cleaner.
27. Always store the appliance indoors in a cool and
dry place.
28. Do not pickup water dry household use only
29. Damage caused by improper use or by
observing the instructions in this manual will
void warranty.
Vacuum cleaner with power head
1. The electric hose contains electrical connections;
Do not
- immerse it in water for cleaning;
- The hose should be checked regularly and
must not be used if damaged.
- The vacuum cleaner handle contains
electrical connections the handle is not
a serviceable part
- The vacuum cleaner rod contains
electrical connections the rod is not a
serviceable part
- The vacuum cleaner powerhead
contains electrical connections the
powerhead is not a serviceable part
2. Use the electric power head only
for vacuuming dust and dry
substances in the home.
3. Never run over the power cable
with the power head as the
cable could get damaged.
Never
4. touch the brush roller
while the vacuum cleaner is
connected to the Mains.
5. To prevent unnecessary wear
on the power head cleaning
nozzle keeps it moving
while in operation.
not