Remote Controller - JVC KD-SH9700 Instructions Manual

Remote controller

1
ATT
2
CD
DAB
FM
3
PRESET
AM
4
CH
AUX
5
RM-RK100
1 • Turns on the unit if pressed when the unit is
turned off.
• Turns off the unit if pressed and held for a
few seconds.
• Drops the volume level in a moment if
pressed briefly.
Press again to resume the volume.
2 Changes the angle of the control panel to four
positions.
3 Skips to the root while listening to an MP3
disc.
4 • CD : Selects CD player.
• FM : Selects FM tuner.
Each time you press the button, FM
band (FM1, FM2 and FM3) changes.
Note: Does not function as the DAB
button.
• AM : Selects AM tuner.
• CH : Selects CD changer.*
• AUX :Selects the external component
(LINE IN).*
5 *
3
• Changes the volume.
6 Selects the sound (iEQ) mode.
Each time you press the button, the sound
(iEQ) mode changes.
ANGLE
6
EQ
7
DISC
8
PRESET
R D
9
DISC
p
SEL
VOLUME
1
2
7 • Searches stations while listening to the
radio.
• Fast-forwards or reverses the track if
pressed and held while listening to a disc.
• Skips to the beginning of the next track or
goes back to the beginning of the current (or
previous) tracks if pressed briefly while
listening to a disc.
8 • Changes the disc number while listening to
the CD changer. Each time you press and
hold the button, the disc number changes,
and the selected disc starts playing.
• Skips to the first track of a folder on a higher
hierarchy level or on a lower hierarchy level
if pressed briefly while listening to an MP3
or a WMA disc. (This does not function for
WMA discs on the MP3-compatible CD
changer).
• Adjusts the fader level on the fader/balance
adjustment screen.
9 • Changes the preset channel number while
listening to the radio. Each time you press
the button, the preset channel number
changes, and the selected station is tuned
in.
• Skips to the first track of the next folder or
the first track of the previous folder if
pressed and held while listening to an MP3
or a WMA disc.
• Skips to the first track of the next folder or
the first track of the previous folder on the
same hierarchy level if pressed briefly while
listening to an MP3 or a WMA disc. (This
does not function for WMA discs on the
MP3-compatible CD changer).
• Adjusts the balance level on the fader/
balance adjustment screen.
p *
3
Turns on or off the fader/balance adjustment
screen. Then you can adjust them using the
buttons explained above (8 and 9).
1
* Without connecting the CD changer, you cannot
select it as the source to play.
* 2
For KD-SH9750: If the "Line In" setting is
changed to "Off," you cannot select "LINE IN"
(see pages 40 and 42).
For KD-SH9700: To select "LINE IN," change
the "Ext Input" setting to "Line In" (see pages
40 and 42).
3
* These buttons do not function in the preferred
setting mode (PSM) adjustment.
5