Dsp Operations; Selecting The Dsp Modes - JVC KD-SH9700 Instructions Manual

Selecting the DSP modes

Using the DSP (Digital Signal Processor) modes
built in this unit, you can create a more acoustic
sound field in your car compartment.
Available DSP modes:
THEATER: Reminds you of the intensity
reproducing a theater.
HALL: Reminds you of a large concert
hall with a being-there feeling.
CLUB: Reminds you of powerfulness
reproduced in a dance club.
DOME: Reminds you of a dome with a
high ceiling.
STUDIO: Reminds you of live sounds in a
recording studio.
V. CANCEL:Reduces the vocal sounds (Voice
Cancel). Good for mastering your
favorite songs—Karaoke.
DEFEAT: Cancels the DSP modes.
Note:
Effectiveness of "V.CANCEL" depends on the
recording condition of the sources. Especially, if you
play back the following sources you cannot get the
satisfactory results.
• Monaural sources such as AM and monaural FM
broadcasting programs,
• Multiplex sound sources, and
• Sources recorded with duets, strong echo, a chorus,
or only a few instruments.

DSP OPERATIONS

1
Press SEL (select) once to show the
DSP mode selection screen.
The last selected DSP mode
SEL
screen appears.
• If you press the button twice or more, the
unit enters different sound adjustment
modes.
DSP
• For iEQ (sound mode) settings, see pages
28 and 29.
• For SEL (basic sound) settings, see pages
30 and 31.
2
Press the number button to select
one of the DSP modes listed on the
display.
• This unit has two DSP mode selection
screens. To move to the other screen,
press 5 (up) or ∞ (down).
1 2
1 2
CONTINUED ON THE NEXT PAGE
iEQ SEL
Canceled
3 4 5
Press 5 (up) or ∞ (down).
3 4 5
6
6
25