Operation; Control Panel Description; Control Options; Programming - Chauvet Q-wash 560Z-LED User Manual

4. Operation

Control Panel
Description

Control Options

Programming

DMX Operation

Stand-alone
Operation
Q-Wash 560Z-LED User Manual Rev. 05
Button
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value
<ENTER>
in to the current function
Navigates upwards through the menu list and increases the numeric value
<UP>
when in a function
Navigates downwards through the menu list and decreases the numeric
<DOWN>
value when in a function
You can set the Q-Wash 560Z-LED start address in the 001~512 DMX range. This allows
for the control of up to 34 products in the 15-channel ADVANCED personality.
Refer to the Menu Map on page 15 to learn how the menu options relate to each other.
The menu map has a Menu Level and a variable number of programming levels for each
option.
To go to an option in the Menu Level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select it. This will take you to the first programming level for
that option.
To select an option or value within the current programming level, press <UP> or <DOWN>
until shown on the display. Press <ENTER> to accept. If there is another programming
level, you will see that first option or you will see the selected value.
To exit to the previous menu level, press <MENU>.
In the EDIT menu, <UP> and <DOWN> will only change the value of the current
option. To change to the next option, press <ENTER>.
1. Select DMX operation.
a) Go to MENU > INTRO > RUN.
b) Select DMX512.
2. Select a DMX mode.
a) Go to MENU > INTRO > CHANNELS.
b) Select BASIC or ADVANCED.
3. Select the starting address.
a) Go to MENU > INTRO > ADDRESS.
b) Select a starting address, 001~498 (Advanced) or 001~501 (Basic).
The highest possible starting address for each DMX mode is:
1. Go to MENU > INTRO > RUN.
2. Select a stand-alone operation mode (AUTO 1, AUTO 2, CUSTOM, or
TEST).
Of all the stand-alone operation modes indicated above, only "CUSTOM" is editable
(see Edit Custom).
Function
DMX Mode DMX Address
Basic 501
Advanced 498
Operation
-9-