Page 2
CHAUVET® to notify any person or company of such revision or changes. This does not constitute in any way a commitment by CHAUVET® to make such changes. CHAUVET® may issue a revision of this manual or a new edition of it to incorporate such changes.
Product at a Use on Dimmer Glance Outdoor Use Sound Activated Master/Slave Q-Wash 360Z-LED User Manual Rev. 01g Convention Meaning 1~512 A range of values in the text 50/60 A set of mutually exclusive values in the text...
There are no user serviceable parts inside this product. Any reference to servicing it you may find from now on in this User Manual will only apply to properly CHAUVET® certified technicians. Do not open the housing or attempt any repairs unless you are one of them.
2. Introduction Product The Q-Wash 360Z-LED is an RGBW LED moving yoke, wash fixture. It consists of a base section and a moving yoke with a pan range of up to 540º. The Description moving head, which has a tilt range of 270º, contains the 91 RGBW LEDs and the zoom motors.
Introduction Product Overview Power Input IEC Socket 3-pin DMX In 3-pin DMX Out 5-pin DMX In Fuse holder 5-pin DMX Out Power Switch Control panel Q-Wash 360Z-LED User Manual Rev. 01g...
3. Setup AC Power The Q-Wash 360Z-LED has an auto-ranging power supply that can work with an input voltage range of 100~240 VAC, 50/60 Hz. Make sure that you are connecting this product to the proper voltage, as per the specifications in this guide, the product’s user manual, or on the product’s sticker.
Setup DMX Linking You may link the Q-Wash 360Z-LED to a DMX controller using a standard DMX serial connection. If using other DMX compatible fixtures with this product, it is possible to control them individually with a single DMX controller.
· If hanging this product, make sure that the location where you are mounting it can Procedure The Q-Wash 360Z-LED comes with two omega brackets to which you can attach “C” or “O” clamps. You must supply your own “C” or “O” clamps and make sure that they are capable of supporting the weight of this fixture.
<ENTER> <DOWN> Control Options You can set the Q-Wash 360Z-LED start address in the 001~512 DMX range. This allows for the control of up to 34 fixtures in the 15-channel ADVANCED personality. Programming Refer to the Menu Map on page 14 to learn how the menu options relate to each other.
Operation Master/Slave The Master/Slave mode allows a group of Q-Wash 360Z-LED fixtures (the slaves) to simultaneously duplicate the output of another Q-Wash 360Z-LED (the master), whether static mode settings or auto/custom programs, without a DMX controller. 1) Set the master unit: 2) Set each of the slave units: ·...
1) Go to MENU > SPECIAL > RESET. 2) Select DMX or SYSTEM. Q-Wash 360Z-LED User Manual Rev. 01g Continued from previous page DIMMER0: The output is proportional (linear) to the Dimmer and RGBW channel values.
The fixture will return to Normal if the LEDs’ temperature becomes too high. Color Settings The COLOR setting determines how the Q-Wash 360Z-LED generates the white color based on various RGB settings. 1) Go to MENU > SPECIAL > COLOR.
The fixture will execute all the steps in the CUSTOM program and it will stop. To make the fixture start over add a last step whose duration is 0 seconds. Example: Q-Wash 360Z-LED User Manual Rev. 01g Continued from previous page DIMMER, STROBE, ZOOM, DIMSPEED, and TIME.
Selects the pan position TILT Selects the tilt position SPEED Selects the pan/tilt speed 000~255 GREEN Combines red, green, blue, and white to obtain a custom color BLUE WHITE Continues on the next page Description Q-Wash 360Z-LED User Manual Rev. 01g...
Level EDIT (Cont.) EXTRA Extra Menu Level CALIB DEFAULT Q-Wash 360Z-LED User Manual Rev. 01g Continued from previous page Level Level DIMMER Selects the dimmer value STROBE Selects the strobe frequency and mode ZOOM 000~255 Select the zoom position DIMSPEED...
Auto program 1 (3 s activation delay) Auto program 2 (3 s activation delay) Test (3 s activation delay) Custom program (3 s activation delay) No function Reset (3 s activation delay) No function Q-Wash 360Z-LED User Manual Rev. 01g W: 100%...
Channel ADVANCED Q-Wash 360Z-LED User Manual Rev. 01g Function 000 ó 255 0~540º 000 ó 255 Fine movement control Pan Fine 000 ó 255 0~270º Tilt 000 ó 255 Fine movement control Tilt Fine 000 ó 255 Fast~Slow Pan/Tilt Speed 000 ó...
· Gently polish the LEDs cover until it is free of haze and lint. Always dry the LEDs cover carefully after cleaning it. Refrain from spinning this product’s fans using compressed air. -18- the external vents and accessible internal components. alcohol. Q-Wash 360Z-LED User Manual Rev. 01g...
Interference from AC wires Faulty Display board If you still experience technical problems after trying the above solutions or if you need to send the unit for repair, contact CHAUVET® Technical Support. Q-Wash 360Z-LED User Manual Rev. 01g Cause(s) Configure fixture’s parameters...
Be sure to pack the fixture properly. Any shipping damage resulting from inadequate packaging will be the customer’s responsibility. As a suggestion, proper UPS packing or double-boxing is always a safe method to use. CHAUVET® reserves the right to use its own discretion to repair or replace returned product(s). Claims The carrier is responsible for any damage incurred during shipping to this product or any part that shipped with it.
Note: Dimensions in inches rounded to the nearest decimal digit. Electrical Light Source Photo Optic Motion Thermal Max. External Temperature Ordering Q-Wash 360Z-LED User Manual Rev. 01g Length Width 13.3 in (339 mm) 9.1 in (232 mm) Power Supply Type Switching (internal) Parameter...
Page 26
Technical Information CHAUVET® 5200 NW 108th Avenue Sunrise, FL 33351 (USA) (800) 762-1084 – (954) 929-1115 FAX (954) 929-5560 www.chauvetlighting.com Q-Wash 360Z-LED User Manual Rev. 01g June 2011...