Refitting The Front Wheel - VESPA LX 50 Workshop Manual

Suspensions
Soap-based lithium grease with NLGI 3; ISO-L-
XBCHA3, DIN K3K-20

Refitting the front wheel

- When refitting, tighten the 5 screws to the speci-
fied torque
Locking torques (N*m)
Nut tightening torque
Handlebar
Removal
Remove the handlebar cover before carrying out
this operation,.
- After removing the transmissions and discon-
necting the electrical terminals, remove the termi-
nal fixing the handlebar to the steering.
- Check all components and replace faulty parts.
N.B.
IF THE HANDLEBAR IS BEING REMOVED TO REMOVE
THE STEERING, TILT THE HANDLEBAR FORWARD TO
AVOIDING DAMAGING THE TRANSMISSIONS.
Refitting
Carry out the removal operations but in the reverse
order, observing the prescribed tightening torque.
Locking torques (N*m)
Handlebar fixing screw
SUSP - 94
20 to 25 N•m
50 ÷ 55
Vespa LX 50