Playing A Cd Text; Locating A Track Or Particular Portion On A Cd - JVC KD-SH77/KD-SH55 Instructions Manual

Playing a CD Text

In a CD Text, some information about the disc (its
disc title, performer and track title) is recorded.
You can show these disc information on the
display.
1
Select text display mode while
playing a CD Text.
Each time you press the button,
the display changes as follows:
Disc Title / Performer
Current track no.
and Elapsed playing time
Notes:
• The display shows up to 10 characters at one time
and scrolls if there are more than 10 characters.
See also "To select the scroll mode – SCROLL" on
page 19.
• When you press DISP (D) while playing a
conventional CD, "NO NAME" appears for the disc
title/performer and the track title.
Locating a track or particular
portion on a CD
To fast-forward or reverse the track
12
Track Title
Press and hold ¢
while playing a CD, to
fast-forward the track.
4 ,
Press and hold
while playing a CD, to
reverse the track.
To go to the next track or the previous tracks
To go to a particular track directly
Press the number button corresponding to the track
number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
,
Elapsed playing time
Track number
Press ¢
briefly, while
playing a CD, to go ahead
to the beginning of the next
track. Each time you press
the button consecutively, the
beginning of the next track
is located and played back.
4 briefly, while
Press
playing a CD, to go back to
the beginning of the current
track. Each time you press
the button consecutively, the
beginning of the previous
tracks is located and played
back.