Playing A Cd Text - JVC KS-FX490 Instructions Manual

Playing a CD Text

In a CD Text, some information about the disc
(its disc title, performer, and track title) is
recorded.
This CD Text information will be shown
automatically when you play a CD Text.
To change the CD Text information
manually, select text display mode while
playing a CD Text.
Each time you press the button,
the display changes as follows:
( lights up on the display)
Elapsed playing time and
Notes:
• The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also "To select the scroll mode—SCROLL" on
page 17.
Some characters or symbols will not be shown (and
be blanked) on the display.
(Ex. "ABCå!d#" ]"ABCA D ")
• When you press DISP (display) while playing a
conventional CD, "NO NAME" appears for the
disc title/performer and the track title.
22
Disc title / performer
Track title
Current track number
To change the display information
While playing back an MP3 file,
you can change MP3 disc
information shown on the display.
Each time you press DISP
(display), the display changes to
show the following:
• When "TAG DISP" is set to "TAG
ON" (initial setting: see page 17)
Album name / performer
(TAG
Track title (file name*)
(TAG
Elapsed playing time and
Current file number
* If an MP3 file does not have ID3 tags, folder
name and file name appear. In this case, the
TAG indicator will not lights up on the display.
• When "TAG DISP" is set to "TAG OFF"
( lights up on the display)
( lights up on the display)
Elapsed playing time and
Current file number
Note:
The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also "To select the scroll mode—SCROLL" on
page 17.
(folder name*)
lights up on the display)
lights up on the display)
Folder name
File name