Time-of-use/peak pricing
To setup time-of-use/peak pricing temperature setpoint offsets:
1. Open the thermostat door.
2. Press and hold the soft buttons below the heat and cool setpoints
simultaneously (the two bottom buttons on the right) until the screen
displays the check filter reset reminder and 01 in the lower right corner.
3. Press the up arrow button until 01 changes to 12 with 0 next to it. You
will also see the words peak energy price on the screen.
4. Press the rightmost lower button then press the up or down arrow
button until the screen displays the number of degrees (0 to 10) that you
want to automatically adjust your thermostat's programmed setpoint during
peak pricing times.
5. Press the done button.
6. Close the thermostat door.
35