Carrier ComfortChoice Edge Owner's Manual page 34

Real-time pricing
1. Open the thermostat door.
2. Press and simultaneously hold the soft buttons below the heat and
cool setpoints (the two bottom buttons on the right) until the screen
displays the check filter reset reminder and 01 in the lower right corner.
3. Press the up arrow button until 01 changes to 09 with 1 next to it. You
will also see the words energy price med on the screen.
4. Press the rightmost lower button then press the up or down arrow
button until the screen displays the number of degrees (0 to 10) that you
want to automatically adjust your thermostat's programmed setpoint when
your utility issues a pricing signal.
5. Press the done button.
6. Close the thermostat door.
To setup temperature offsets for periods when your utility issues a high or
peak pricing signal, follow Steps 1 to 6 above, but in Step 3 press the up
arrow button until 01 changes to 10 (for high) or 11 (for peak). You will see
the words energy price high or peak energy price on the screen.
32 32