20
Drain
The connector for the machine discharge (A) has
21
an external diameter of 110 mm. The distance
between the machine and the floor gully or drai-
nage channel should be at least 250 mm.
Connect a hose or a pipe to the drain connec-
tion. Avoid acute angles or kinks which could im-
pede the flow. The hose or pipe should open into
a floor gully, drainage channel or similar waste
outlet. Make sure that the hose's function is un-
affected by the tilting function if the machine has
this feature.
If the machine has a second discharge, B and C
must also be connected to the floor drain.
Ventilation
The vent (A) from the washing machine drum is
22
at the back of the machine. If bleach or other
additives are used, the pipe should be extended
and connected to a ventilation system.
Installation
21
22
250 mm
B
A
C
A
5577
5572