Detergent Dispenser, Non-Liquid Detergents; Installation Of Equipment For External Liquid Supply - Electrolux W4400H Installation Manual

Detergent dispenser, non-liquid detergents

If only non-liquid detergents are to be used in
the detergent dispenser, the following adapta-
tion is recommended:
Drill two 5 mm holes in the bottom of each
23
scoop to allow any water left to drain off.
Installation of equipment for external liquid
supply
Electrical installation may only be carried
out by competent, authorised personnel.
All external equipment which is connected
to the machine must be CE/EMC-approved.
The machine is fitted with 8 connections as
24
standard , A (6 x ø10, 1 x ø16 and 1 x ø20),
which are intended for connecting hoses from an
external dispensing system.
The external dosage unit connects to the X146
25
via the upper terminal in the coin operation unit.
There are a total of 8 outlets for the dosing of
washing detergent. The number on the termi-
nal corresponds to the numbering of the liquid
detergent function when setting the wash pro-
gramme.
A common zero for all the outlets can be found
on the X146 terminal "Neutral". 230 V max 0.5 A
only intended for control voltage. If the machine
is not fitted with a detergent reservoir, then ad-
ditional signals can be received from X140.
Installation
23
24
25
21
0355
A
5875
6527