AirSep Focus Portable Patient Manual page 13

Before operating Focus for the first time, familiarize yourself with the major components. These are illustrated in the Figures on
the following pages and discussed later in the manual.
Connecting to the Focus Power Inlet:
Locate the arrow marking at the top of the connector. Insert connector (Figure 5) into the Focus power inlet ( Figure 6) with the
arrow on the side of the connector facing outward. Do not force the connector into the power inlet, as it can be inserted only one
way. This ensures that neither the unit nor the power accessories are damaged.
Focus operates from four different power sources.
NOTE: Always connect to the Focus power inlet first before connecting to a power supply.
1) Connecting Focus to AC electrical power:
When you are near an AC outlet, you may choose to operate Focus with the universal power supply rather than the battery.
Connect the cord on the power supply labeled as DC OUT To Focus into the Focus unit's power inlet,
as shown in Figure 7. Do not force the plug, as it should be inserted only one way.
From the other end of the power supply, connect the 3-prong AC cord from the power supply into any standard outlet.
MN170-1 rev A 03/11
Focus unit's
power connector
Figure: 5
DC OUT to Focus
Focus unit's
power inlet
Figure: 6
Focus unit's
power inlet
Figure: 7
9