Important Safety Rules - AirSep Focus Portable Patient Manual

Important Safety Rules for Optional AirBelt
The incorrect use of AirBelt can cause the battery to get hot, ignite, and can cause serious injury. Be sure not to pierce,
strike, step on, or drop the battery, or otherwise subject the battery to strong impacts or shocks.
Replace safety cap on AirBelt cord when not in use.
Do not attempt to charge the optional AirBelt with the Focus power supply or AirBelt can be damaged.
Use only the AirBelt power supply provided to charge AirBelt.
Do not allow Focus or AirBelt to be stored in a very hot automobile or in other similar, high- or low-temperature
environments. Operating AirBelt outside the normal temperature range can affect the performance.
(Refer to the Specifications section in this manual.)
Storing your AirBelt for extended periods of time at high temperatures or with a fully charged or completely discharged
battery can degrade its overall battery life.
Depending upon the temperature of the Focus battery, it can take several minutes for the charging cycle to start after
connecting to power. This is a normal condition and is intended for safe charging,
AirBelt does not need to be fully discharged before recharging. It is recommended to charge AirBelt after each use.
If the AirBelt power supply remains connected when AirBelt is fully charged, the four LEDs will turn off within ½ hour.
MN170-1 rev A 03/11
7