GETTING STARTED
Installing the PC program
The vtLite program allows the WorldCommunicator
functions to be operated or configured from a PC,
such as:
• Phone book
• Traffic log
• Precharge
• DECT/ISDN configuration
For an explanation of the functions, see the "User
Guide" accessible on the enclosed CD.
The vtLite program is stored on the enclosed CD
and must be installed on the PC harddisk:
1
Insert the CD :
The Start Page opens automatically in a few seconds.
(Alternatively, open the Acrobat file "NWC_StartPage" on
the CD. If necessary, install Acrobat Reader by clicking
"ar40eng" in the "SW Installation" folder.)
2
Click "Software Installation" and then "vtLite".
Allow files to load on to the PC hard drive.
The installation of the program starts
automatically when files have been loaded.
3
Connect the serial cable between the
PC serial port and the RS-232 port on the
WorldCommunicator Modem Unit.
4
Start the vtLite program by clicking
vtLite via Start>Programs>M4.
5
Turn ON the Modem Unit.
If no contact, click Mode>Terminal MMI in
the vtLite window.
If still no contact, restart the Modem Unit.
Nera WorldCommunicator
ADDITIONAL DEVICES
ISDN
RS-232
PC serial port
'
CONT
D
USB
Click to
open
Device
Manager
> > > > >
25