Connecting Additional Isdn Devices; Linking Additional Dect Handsets - Nera WorldCommunicator Getting Started Manual

ADDITIONAL DEVICES

Connecting additional ISDN devices

An ISDN multiport is needed if more than one unit is
to be connected.
See also "Services".
A call to a fixed net can be made without any prior
programming.
It is, however, advisable to program the Modem Unit
for appropriate reception of incoming calls, internal
calls and devices that can handle more than one
service. See "Routing of incoming calls".
The programming must be done from a PC con-
nected to the Modem Unit, see
program".
To initate connection of an ISDN device, see
MSN configuration".
Example of entering MSN no. 30 into Siemens
type Profiset 30:
• Displayed on the phone:
• Leave handset on, and enter
0 1 1 3 0
on the phone keypad.
• Finally, pressing enters
MSN number 30 as MSN1 in the ISDN phone.
24
'
CONT D
"Installing the PC
"ISDN
00.00.00 00:00
01 1 30
MSN number
MSN1 (first no.)

Linking additional DECT handsets

Up to 12 DECT handsets may be registered with the
base station.
The handsets must be programmed with an MSN
number ranging within 01 - 12, see table in
of incoming calls".
The programming must be done from a PC con-
nected to the Modem Unit, see
program".
To open the WorldCommunicator base station for
linking of a DECT handset, see
figuration".
Example of registering Siemens type Gigaset 2000:
• Press to switch ON the DECT handset.
The message Register? is displayed.
• Press the OK display key on the DECT.
• On the DECT keypad, enter the
WorldCommunicator base station password:
1 2 3 4, which are the first four digits of the owner
password.
(Use new code when the owner password is
changed.)
• Press the OK display key.
• Wait until the message REGISTER is displayed.
Press on the WorldCommunicator to complete
the registering of the DECT handset.
The handset is now ready for use.
Nera WorldCommunicator
GETTING STARTED
"Routing
"Installing the PC
"DECT MSN con-