Making A Call - Nera WorldCommunicator Getting Started Manual

SETTING UP '
CONT D

Making a call

Call through default Net service provider
When using the WorldCommunicator for the first
time in an Ocean Region, make sure that the region
appearing in the display is correct:
Unknown net
AOR-W
Ready for call
520
If incorrect, see "Selecting default Net service
provider".
Dialing:
1
On the connected equipment, dial 00 and the
country code, followed by the subscriber number
(max 22 digits), and finally press
number, f.ex.:
0 0 4 7 6 7 2
Note! Some types of equipment do not have # implemented in
software even if the #-key is on the keypad. Then in front of the
telephone number use:
903 if dialing the number digit by digit, or
902 if for the number to be sent as a block. f.ex:
9 0 2 0 0 4 7 6
2
Wait for answer.
3
Disconnect the call when finished.
20
09:46
to send the
On DECT
also:
4 4 7 0 0
7 2 4 4 7 0 0
Internal communication
Calls can be made internally between the connected
ISDN and/or DECT equipment.
The individual MSN number is established with the
Device Manager.
See "ADDITIONAL DEVICES".
ISDN-to-ISDN/*DECT:
DECT-to-ISDN:
DECT-to-DECT:
* The DECT handset Id is normally the same number as the MSN.
** If the telephone lacks the
f.ex.:
1 0 3 2 0
Number of connections
When an ISDN device is used to communicate via
satellite, the 2nd ISDN channel can be used to call a
DECT handset. Four DECT handsets can be used
for internal calls.
When a DECT handset is used to call via satellite,
four DECT handsets and both ISDN channels can
be used for internal calls.
Nera WorldCommunicator
GETTING STARTED
MSN (example)
**
2 0
2 0
*
Handset Id (example)
INT 5
-key, 103 may be dialed instead,