Advertisement
Figure 5
4. lns(all new door latch assembly and reverse procedures to cornplete repairs.
FLOAT SWITCH ASSEMBLY
The water fioat assembly is located in the night lower side of the dishwasher {the
portable located behind the lower front crosspiece). When too much water enter
the dishwasher, the water will enter the float support through the overflow plpe,
the float will make the floating switch acts, the electrical supply to the water vatue
willdisconnected and the drain purnp keep on working.
lf the switch fails to operate. check the following:
. Loose connection at the switch terminal.
. Switch not installed properly.
. Warped stem on float, not contacting the actuator blade.
. Float support restricts free float movernent.
. Check if the float support is cracked.
. Food or foreign material restrictinE free float rnovernent.
Figure 7
To Remove Or Rrylace Floaf Swfch
1 . Dlsconnect dishwasher from ebctrical supply.
2. Rernove electrical leads to float switch.
3" Take down the switch ftorn float support-
4^ Insbll new float $vitch and reverse procedures ts co'mp{ete repairs {$ee figure 6}
.lf the rubber
Advertisement
