Table of Contents
Advertisement
In channel/frequency mode, press
splay
"004
POW?".
Press
enTer
and the display will show
(high power): turn the encoder knob to select the desired power level.
To confirm your selection press
enTer
Squelch Threshold Setting
This function turns on the Squelch when the signal is strong; the Squelch
will stay off when the signal is weak. Set the same DCS codes of your
group and turn on the squelch.
By setting the level too high, you may not receive the weak signals; while
by setting it too low you may receive noises or undesired signals.
nOTe:
This transceiver has ten (0~9) available levels: 0 means that the Squelch
is turned on. From level 1 to level 9 you will have different levels of noises
reduction. The higher is the level, the louder will be the Squelch.
Procedure:
MenU
and 5sQL: the screen will show
Press
enTer
Press
and the display will show
5").
Press any number (0-9) on the keypad or rotate the encoder to select the
desired squelch level.
Press
enTer
as confirmation and press
Scrambler Setting
The scrambler is designed to protect communications.
This feature prevents parties of other networks from hearing and under-
standing voice communications.
Procedure:
Press
MenU
and
6scr
key and the display will show
Press enTer: you will see on the display
(scrambler off ).
Turn the encoder to select on/off and press
Mr
to exit.
Backlight On/Off Setting
In channel/frequency mode, press
MenU
20 |
MenU
and 4PWr: the screen will di-
"POW L"
(low power) or
"POW H"
and
VFO/Mr
to exit.
"005
SQL?".
"SQL
5"(Factory Settings " SQL
VFO/Mr
to exit.
"006
SCRM?".
"ON"
(scrambler on),
"OFF"
enTer
to confirm; press
VFO/
and 7LeD.
CT710 Instruction Guide
The screen will show
"007
LED?". Press
the display
"ON"
(backlight on). Turn the encoder to select
"AUTO".
Press
enTer
to confirm, and
VFO/Mr
Backlight Color Selection
In channel/frequency mode, press
show
"008
LIGHT?".
enTer
and by turning the encoder, you have the color options:
Press
"ORANGE", "PURPLE", "BLUE".
Press
enTer
to confirm the desired backlight color and
Beep On/Off
If you enable this function, every time a button is pressed, you will hear
a Beep tone.
In channel/frequency mode, press
MenU
appear on the display.
Press enTer:
"ON"
means beep on,
"OFF"
der to choose one of the two options. Press
Mr
to exit.
Keypad Lock Function Setting
This function is useful to lock the keypad and so, avoid any accidental
pressure of the buttons.
Press
MenU
and turn the encoder to item 11: the screen will display
"011
KEYBO?".
This transceiver has 2 types of Keypad lock available: Auto-lock and Ma-
nual-lock.
Press enTer: the display will show
matically).
Turn the encoder to select "MANUAL/AUTO", then press
confirm and
VFO/Mr
to exit.
You can also press *LOcK: the display will show
If you want to lock the keypad hold down
the keypad, press
*LOcK
again for 2 seconds: the keypad will be unlo-
cked.
CT710 Instruction Guide
enTer
and you will see on
"ON" "OFF"
to exit.
MenU
and 8cOLOr: the display will
VFO/Mr
to exit.
and 9BeeP:
"009 BEEP?"
will
means beep off; turn the enco-
enTer
to confirm and
VFO/
"AUTO"
(keypad lock turns on auto-
enTer
to
"LOCK?"
.
*LOcK
for 2 seconds. To unlock
| 21
Advertisement
Table of Contents
