Bose Acoustic Wave Owner's Manual page 3

Hide thumbs Also See for Acoustic Wave:
Table of Contents

Advertisement

1.
Read these instructions – for all compo-
nents before using this product.
2.
Keep these instructions – for future
reference.
3.
Heed all warnings – on the product and in
the owner's guide.
4.
Follow all instructions.
5.
Do not use this apparatus near water or
moisture – Do not use this product near a
bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, near a swimming
pool, or anywhere else that water or
moisture are present.
6.
Clean only with a dry cloth – and as
directed by Bose
product from the wall outlet before cleaning.
7.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions – To ensure
reliable operation of the product and to
protect it from overheating, put the product
in a position and location that will not
interfere with its proper ventilation. For
example, do not place the product on a bed,
sofa, or similar surface that may block the
ventilation openings. Do not put it in a built-
in system, such as a bookcase or a cabinet
that may keep air from flowing through its
ventilation openings.
8.
Do not install near any heat sources,
such as radiators, heat registers,
stoves or other apparatus (including
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third ground-
ing prong. The wider blade or third
prong are provided for your safety. If
the provided plug does not fit in your
outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket or table specified by the
manufacturer or sold with the
apparatus. When a cart is
used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long
periods of time – to prevent damage to
this product.
Corporation. Unplug this
®
Important Safety Instructions
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way: such as power-supply cord or plug
is damaged; liquid has been spilled or
objects have fallen into the apparatus;
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped – Do not attempt to
service this product yourself. Opening or
removing covers may expose you to
dangerous voltages or other hazards. Please
call Bose to be referred to an authorized
service center near you.
15. To prevent risk of fire or electric shock,
avoid overloading wall outlets, exten-
sion cords, or integral convenience
receptacles.
16. Do not let objects or liquids enter the
product – as they may touch dangerous
voltage points or short-out parts that could
result in a fire or electric shock.
17. See product enclosure for safety
related markings.
Information about products
that generate electrical noise
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, this is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, you are encouraged to
try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment to an outlet on a
different circuit than the one to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Unauthorized modification of the receiver
or radio remote control could void the user's
authority to operate this equipment.
This product complies with the Canadian ICES-
003 Class B specifications.
2a

Advertisement

Table of Contents
loading

Table of Contents