Pre-Ride Inspection Check List - HUSABERG E 400 e User Manual

SAFETY AND PRECAUTIONS
2

PRE-RIDE INSPECTION CHECK LIST

Engine oil
Ignition
Radiator
Airfilter
Carburettor
Clutch
Decompression
Chain
Suspension
Wheels
Brakes
Fuel
Steering
Controls
Lighting
Check the level and fill up if necessary.
Check for any leakages in the casing.
Check the sparkplug cap/HV lead for damages.
Check the coolant level and fill up if necessary.
Check for leakages and/or damages of the cells and hoses
and attachments.
Clean, or if necessary, replace the filter
Check the function of the throttle/cable and adjust/replace
any damaged parts if necessary.
Adjust the idling- and/or mixture screw if necessary.
After every time the motorbike has been washed drain the
float chamber of the carburettor.
Check the function and for any leakages.
Check the function of the manual and the semi-automatic
decompression lever and adjust if necessary (non-electrical
starter models only).
Check and adjust/replace the chain if necessary.
Check the sprockets and replace if necessary.
Check the operation of the front fork and the shock absorber
and adjust if necessary.
Check and tighten the swingarm if necessary.
Check the air pressure of the tyres and fill up if necessary.
Check the spokes and tighten if necessary.
Check the level of brakefluid and fill up if necessary.
Check for any leakages and the function of the brakes.
Adjust levers and/or replace hoses/pads if necessary.
Check the level and fill up if necessary.
Check for any leakages in the fuel lines.
Check the clearance of the steering head bearings and
adjust if necessary.
Check the function of the speedometer or odometer (if
incl.in equipment).
Check the functions of the front-, tail-, and brake lights
(and any occuring turn signals).
2
5