HUSABERG E 400 e User Manual page 3

1
Dear client,
We feel ourselves privileged and honoured to be the supplier of your choice of motorcycle. We
know for sure that our product will give you years of fun and performance though the Husabergs
are based upon decades of experience in racing and a dedication hard to find elsewere. You're
bound to feel this through the inborn lively spirit of your bike.
Although mainly designed and constructed for competition purposes it is still very rider-friendly
but due to the design the product needs careful and proper maintenannce. In order to get the
most out of your "beast" and before any use of the motorbike; we highly recommend you to
carefully read this Owner's Manual through. We also recommend you to pay your outmost
attention to the following page regarding safety and precautions and always remember the
fundamental base of all activities on two wheels:
- "Do not overestimate your capabilities, follow the domestic regulations and do think about
your surroundings"
Although the Owner's Manual is put together and written in a way that will make it possible for
an average mechanical experienced person to take care of the maintenance, we recommend
you to let an authorized Husaberg dealer take care of at least the parts we've mentioned under:
Also, part of the maintenance has to be performed by an authorized dealer in order to fulfill the
terms of warranty.
If you follow the advice regarding the set-up and of course also regarding the vital maintenance
of the motorcycle; the Husaberg of yours will provide a maintained level of performance (read:
joy and satisfaction - the reason to your choice of brand).
The personnel of Husaberg Motor AB Sweden
ATTENTION:
ATTENTION:
Never ride in a too low or too high gear -
ATTENTION:
Never let the engine run for more than one minute while stationary
It may cause severe mechanical damages
WARNING:
Do not check the coolant
level while the engine is hot.
ATTENTION:
Service more frequently when
riding under hard conditions
INTRODUCTION
Always put the motorcycle on a stable centerstand
whenever removing either front or rear wheel.
Never ride your motorcycle under the influence of
alcohol, drugs, barbiturates or any other kind of medical
treatments hazardous to your riding performance.
ATTENTION:
Less clearances than the required
cause severe engine damages
ATTENTION:
Do not use a highpressure jet-cleaning
equipment on surfaces around
bearings and other fragile components.
1
3