Installation - Lindy 38010 Manual

Manual
Introduction
Thank you for purchasing one of the products from the LINDY HDMI extender range. This HDMI
Extender Range brings you endless possibilities for digital signage, public display and large
scale demonstration. Where crystal-clear digital video needs to be broadcasted, these
extenders can bring your distribution system to the next level.
The complete product range can be easily combined to suit almost every application through
low cost Cat5e cable. By taking the advantage of Cat5e cable, installation is simplified and
particularly cost effective whether you are splitting or extending the HDMI signal.
Features
• HDMI signal extension through Cat5e cable
• Cat5e cable implementation to minimize use of high-cost HDMI cable
• Ability to cascade
• HDMI 1.2 compliant, full HD ready & 1080p capable with HDCP support
• Built in equalizer
• LED status to indicate the HDMI activity
• Pure hardware solution

Installation

1. Before connecting any device, please ensure everything is powered off
2. Connect the HDMI source to the HDMI extender transmitter device (38010, 38001
Transmitter or 38011 Transmitter) using an HDMI cable
3. Connect one end of the Cat 5/5e/6 cable to the output port on the transmitter and the
other end to the input port of the receiver (38014, 38013 or 38011 Receiver)
4. Using another HDMI cable, connect your HDMI display to the HDMI out port on your
HDMI extender receiver
5. Repeat step 4 untill all HDMI displays are connected
6. Once all cables are connected to the transmitters and receivers, power on all devices
7. If required, use the EQ control to adjust the picture quality
8. Use LINDY DVI to HDMI cables to connect to DVI devices. (note: most DVI devices do
not support audio)
2
English