Frequently Asked Questions - Lindy 38010 Manual

Manual English

Frequently Asked Questions

How does the (EQ) equalizer work?
The equalizer is a built in electronic device used to adjust the picture quality. The EQ knob must
be turned slowly until the picture is showing the correct quality display.
What kind of Cat X cable can I use?
We recommend using Cat5e or higher cable for the best display quality at the maximum
distances. Also try to use Skew free or SFTP network cable for improved performance.
What is the minimum category cable I can use?
The minimum Category cable we recommend using is Cat 5e. Using this type of cable may
have an effect on the maximum transmission distance than can be achieved.
I want to extend further than the standard specification states.
You can extend further than the recommend distances by using the highest quality Cat5e/6
cable with no skew and by using 24 gauge HDMI cables. You may get longer distances if you
set the resolution to 480P
I am using the short range 20m receiver but cannot see an image.
This receiver is only intended for short distances, please ensure you are using the correct cable
and reduce your resolution to 480i. If the picture is now shown then you may need to use a
receiver capable of longer distances.
There is no image on the monitor, what could be the problem?
Always check that the cables are correctly inserted and all the devices are powered on and
check the source device is transmitting the signal. Also try to reduce the output signal from your
HDMI source and make sure you are using the minimum recommended network cable.
7