Vga And Sxga Settings; Mirror Decoding - Code Reader 2.0 User Manual

Code reader 2.0 user manual

Hide thumbs Also See for Code Reader 2.0:

Table of Contents

9.5 - VGA & Megapixel Settings

User's may optimize the CR2 unit's megapixel (SXGA) imager (1280 x 1024) to a VGA (640 x 480). This

feature is used to decrease the pixel sampling area, which will greatly increase processing speed. This is

an advanced feature used for the rapid decoding of 1-dimensional/linear codes and larger module size 2-

dimensional codes. Code recommends testing this feature, as it will not work with many high density codes.

Enable VGA - 640 x 480

Enable SXGA - 1280 x 1024 (Default)

9.6 - Mirroring

Scan the following codes to enable/disable the mirroring feature:

Off (Default)

Note: The Mirroring feature allows the CR2 to read codes as they are seen through a mirror (inversed

180°). If the Mirroring feature is enabled, all other code reading ability will be disabled. This feature may

only be utilized with ﬁrmware version 1242 or greater. Please contact your Code representative if you have

any questions.

C001537_04_CR2 User Manual -

Save Settings

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the Code Reader 2.0 and is the answer not in the manual?