Manually Copying - Panasonic DMR-EH80V Operating Instructions Manual

Manually copying

DC channel (copy input channel)
If you select the DC channel, the VHS
element can receive and record video/audio
signals from HDD or DVD.
VHS
To select the DC channel press CH
or INPUT SELECT several times.
TP channel (copy input channel)
If you select the TP channel, the HDD/DVD
element can receive video/audio signals
from VHS and copy to HDD or DVD.
DVD HDD
To select the TP channel press CH
or INPUT SELECT several times.
You cannot select the DC channel and the
TP channel at the same time.
64
Manually copying from VHS to HDD or DVD
VHS
DVD HDD
,
Manually copying from HDD or DVD to VHS
DVD HDD
,
VHS
You can not execute the copying procedure while the HDD/DVD or VHS unit is in standby
mode for the TIMER-controlled recordings. Cancel the standby mode.
When copying from HDD/DVD to VHS, the index signal for each title is recorded
automatically.
When copying from VHS to HDD/DVD, the title is automatically created for each index
signal.
Copying from SD Card
Please take notice of the recording information.
Start the playback.
Press PAUSE where you want to start recording.
Use REC MODE to select the recording mode.
Use INPUT SELECT to select the TP channel.
Press REC to start recording.
Use STOP to stop recording.
Start the desired title.
Press PAUSE where you want to start recording.
Use REC MODE to select the recording mode.
Use INPUT SELECT to select the DC channel.
Press PLAY . Press PAUSE
Press REC.
Then press PAUSE to start recording.
Use STOP to stop recording.
HDD RAM -R -RW V +R
( )
where you want to start the recording.
96
50