Panasonic DMR-EH80V Operating Instructions Manual page 104

FUNCTIONS selection menu
To Others
SETUP
Digital Audio Output
PCM Down Conversion
Dolby Digital
Tuning
DTS
Disc
MPEG
Picture
Dolby Digital
Sound
Display Bitstream
Connection
PCM
Others
SELECT
ENTER
RETURN
104
SETUP
Sound
Digital Audio Output
Off
Bitstream
Bitstream
PCM
PCM Down Conversion
Ext Link 1
Dolby Digital
DTS
MPEG
Digital Audio Output
PCM Down Conversion Dolby Digital
Select the appropriate setting if an external unit is connected to the DIGITAL AUDIO
OUT of the DVD Recorder.
[ON] [Off]
Select the audio output mode at a scanning frequency of 96 kHz or 88.2 kHz. Despite this
setting, signals are converted to 48 kHz or 44.1 kHz if they have a scanning frequency of
more than 96 kHz or 88.2 kHz or a disc is copy-protected.
ON: The connected unit cannot process signals with a scan frequency of 96 kHz or
88.2 kHz. Signals are converted to 48 kHz or 44.1 kHz.
Off: The connected unit can process signals with a scan frequeny of 96 kHz or 88.2 kHz.
Signals are output as 96 kHz or 88.2 kHz.
[Bitstream] [PCM]
Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting must be
switched to [PCM]. Otherwise, strong noise can cause damage to hearing or
loudspeakers.
Perform settings based on your audio system.
ENTER
Options
DTS MPEG
ENTER