Setup Menus; Set Channels Automatically; Set Channels Manually - Panasonic DMR-EZ48K Operating Instructions Manual

Setup Menus

"Accessing the Setup Menu"
You will have to perform the following 3 steps for all other
operations on page 55−66.
With the unit stopped
,  to select "Other Functions",
then
OK
,  to select "Setup", then
OK
Notes
Changed settings remain intact even when switching the unit to
standby.
Tips
To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change
is not activated until you press [OK].
To exit the screen
Press [RETURN] several times.

Set Channels Automatically

The channels are automatically set.
Select to suit the type of antenna you are using.
Perform steps 1−3 of "Accessing the Setup Menu" (
,  to select "Channel" then 
,  to select "Set Channels
Automatically", then
,  to select "Antenna" or
"Cable", then
– When a TV (VIERA) supporting HDAVI
Control 3 is connected via an HDMI cable, the
following options will be displayed.
[Set Channels via VIERA Link] You can
acquire the VIERA setting information
[Set Channels without VIERA Link]
OK
to complete.
above).
OK
OK

Set Channels Manually

The captions you select or modify are used as channel names
and displayed on the Direct Navigator screen.
Perform steps 1−3 of "Accessing the Setup Menu" (
,  to select "Channel", then 
,  to select "Set Channels
Manually", then
,  to select channel.
– You can also select channels with the
numbered buttons.
– You can also press [,] to skip several
lines.
Adding and Deleting Channels
To add channels, delete undesired channels, or channels that
have poor reception.
After selecting a channel (
 ,  to select the "Add/Del"
column.
,  to select "Added" or
"Deleted".
– After selecting the "Channel" column with [,
], repeat steps 6–8 to set other channels.
Setting favorite channels
You can defi ne a Favorite list.
After selecting a channel (
 ,  to select the "Favorite"
column, then
,  to select the position on the
list, then
OK
RETURN
to complete.
– After selecting the "Channel" column with [,
], repeat steps 6–9 to set other channels.
left).
OK
above, step 6).
above, step 6).
OK
55
RQT9056