Panasonic DMR-EH80V Operating Instructions Manual page 123

GUIDE Plus+ system: Questions and answers
DOWNLOAD
How does my unit behave during data transfer ?
RECORDING
Is it possible to
programme a recording, with a start and end time that
are different from the GUIDE Plus+ system ?
Does the GUIDE Plus+ system support VPS/PDC ?
Why was the programme programmed with GUIDE
Plus+ not recorded ?
How can I record a programme if "No Data" is
displayed in the GUIDE Plus+ system ?
How can I cancel a TIMER programming ?
GENERAL
Can I receive GUIDE Plus+ system data via a
connected satellite receiver or a Set Top Box ?
What happens when I unplug my unit from the
power outlet ?
What happens if my postal code changes, e.g. if I
move ?
How can I reset my unit to its original default state ?
During data transfer, "GUIDE" appears on your unit's display and the unit's fan switches on.
You can manually change the start and end time of TIMER programmes in the TIMER RECORDING menu.
The GUIDE Plus+ system works independently of VPS/PDC. However, you can programme TIMER
recordings with VPS / PDC in the TIMER RECORDING menu.
The unit is not in TIMER standby (TIMER symbol " " lights up in the unit's display). / Make sure that [GUIDE
Plus+] is selected under Auto Download Priority and change the setting to [Timer Prog.].
Programme the Timer recording manually or via ShowView.
The "T" symbol appears in the GUIDE Plus+ when a TIMER recording is programmed with the GUIDE Plus+
system. To cancel a TIMER RECORDING programming, press PROG/CHECK. Select the desired entry and
press CANCEL.
No, only via the built-in tuner. To perform timer recordings with satellite receivers or Set Top Boxes, please
use the External Link feature or your unit's manual timer programming.
The GUIDE Plus+ system data will not be updated. / If the unit is disconnected from the power supply for a
longer period of time, then the GUIDE Plus+ data is lost. / Make sure that the time is set again appropriately.
Change the postal code in the GUIDE Plus+ Setup menu. If necessary, perform a full Auto-Setup.
Saved GUIDE Plus+ data may be lost.
Select [Shipping Condition] in the Setup menu. Attention: All settings and data are lost if you reset the unit to
its default state.
123