Download Print this page

Greenlee 38456 Instruction Manual page 4

Hydraulic punch driver

Advertisement

IMPORTANT SAFETY INFORMATION
A component failure could throw
broken parts.
• Do not allow anyone to stand in
front of the punch or behind the
hydraulic ram.
• Close access doors or covers on
any equipment that is in line with
the punch or ram.
Failure to observe this warning could
result in severe injury or death.
Do not attempt to punch a hole
through two or more layers of mate-
rial. This will bend or break the draw
stud, and could throw parts with great
force.
Failure to observe this warning could
result in severe injury or death.
Set up the tool properly. An improper setup could
cause a component to fail and strike nearby person-
nel with great force.
• Thread the punch completely onto the draw stud.
All of the punch threads must be engaged by the
draw stud threads. Incomplete assembly could
cause a component failure.
• Use only Greenlee punches, dies, and draw studs.
Other manufacturers' components might not with-
stand the forces generated by this punch driver.
Failure to observe these warnings could result in
severe injury or death.
This punch system was designed for a maximum
operating pressure of 450 bar (6500 psi).
• Use this punch system with the Greenlee 767 Hand
Pump or 1725 Foot Pump only.
• Connect the pump to the ram with Greenlee hoses
and couplers only.
Use of any other hoses or couplers could result in
injury from a component failure.
Greenlee / A Textron Company
Hydraulic Punch Driver
Replace worn, damaged or missing components
with Greenlee replacement parts. Worn or damaged
components can fail, resulting in injury or property
damage.
• Inspect the pump, hoses, couplers, and fittings for
wear or damage.
• Inspect all punch components (punch, die, draw
stud, etc.) for wear or damage.
Failure to observe these warnings could result in
severe injury or death.
Do not exceed the rated capacity of this tool.
Exceeding the rated capacity could cause a com-
ponent failure, which could throw broken parts with
great force.
Failure to observe this warning could result in severe
injury or death.
The punch driver will fall free when the punch is
complete.
• Support the weight of the tool when punching.
• Do not allow anyone to stand beneath an overhead
punch.
Failure to observe this warning may result in injury or
property damage.
Use this tool for the manufacturer's intended purpose
only. Any other use may result in injury or property
damage.
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

Hide quick links:

Advertisement

loading