Download Print this page

Important Safety Information - Greenlee 38456 Instruction Manual

Hydraulic punch driver

Advertisement

IMPORTANT SAFETY INFORMATION

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for pre-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning could
result in severe injury or death.
Greenlee / A Textron Company
SAFETY
ALERT
SYMBOL
Hydraulic Punch Driver
Electric shock hazard:
Do not use this tool near live circuits.
This includes, but is not limited to, the
following:
• near circuit breaker panels or fuse
boxes with energized circuits
• near junction boxes with energized
circuits
Failure to observe this warning could
result in severe injury or death.
Skin injection hazard:
• Hand-tighten all couplers com-
pletely before operating the pump.
Do not use tools to tighten the
couplers.
• Do not use hands to check for
leaks.
• Do not hold hose or couplers while
the hydraulic system is pressurized.
• Release the hydraulic pressure
before disconnecting the hoses or
couplers, and before servicing the
pump or accessory.
Oil under pressure easily punctures
skin causing serious injury, gan-
grene or death. If you are injured by
escaping oil, seek medical attention
immediately.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from flying
debris or hydraulic oil.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

Hide quick links:

Advertisement

loading