JVC GET0576-001A Instruction Manual page 78

Category Menu items
AF-REG *
4
Alternative
frequency/
regionalization
reception
PTY-STANDBY *
PTY standby
TA VOLUME *
Traffic
announcement
volume
P-SEARCH *
4
Programme search
MONO *
6
Monaural mode
IF BAND
Intermediate
frequency band
*
FADER* 7, 8
Fader
BALANCE * 8
Balance
LOUD
Loudness
*
4 Only for FM Radio Data System stations.
*
5 Depends on the amplifier gain control.
* Displayed only when the source is "FM."
6
*
7 If you are using a two-speaker system, set the fader level to "00."
*
8 This adjustment will not affect the subwoofer output.
16
Selectable settings, [reference page]
• AF ON
• AF-REG ON
• OFF
4 PTY OFF, PTY
codes
4 VOLUME 00
– VOLUME 50
(or VOLUME 00
– VOLUME 30)* 5
• SEARCH ON
• SEARCH OFF
• MONO ON
• MONO OFF
• AUTO
• WIDE
R06 – F06
L06 – R06
• LOUD OFF
• LOUD ON
: When the currently received signals become weak, the unit
switches to another station (the programme may differ
from the one currently received), [9].
• The AF indicator lights up.
: When the currently received signals become weak, the
unit switches to another station broadcasting the same
programme.
• The AF and REG indicators light up.
: Cancels.
: Activates PTY Standby Reception with one of the PTY
codes, [9].
: (Initial: VOLUME 15)
: Activates Programme Search, [9].
: Cancels.
: Activate monaural mode to improve FM reception, but
stereo effect will be lost, [7].
: Restore the stereo effect.
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect
will remain.
: Adjust the front and rear speaker output balance.
(Initial: 00)
: Adjust the left and right speaker output balance.
(Initial: 00)
: Cancels.
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.