JVC GET0576-001A Instruction Manual page 15

Category Menu items
AREA
Tuner channel
interval
MONO *
3
Monaural mode
IF BAND
Intermediate
frequency band
COLOR 01
– COLOR 29,
USER
MENU COLOR
Menu color
FADER* *
4, 5
Fader
BALANCE *
5
Balance
LOUD
Loudness
* 3 Displayed only when the source is "FM."
*
4 If you are using a two-speaker system, set the fader level to "00."
*
5 This adjustment will not affect the subwoofer output.
Selectable settings, [reference page]
• AREA US : When using in North/Central/South America. AM/FM
intervals are set to 10 kHz/200 kHz.
• AREA EU : When using in any other areas. AM/FM intervals are set to
9 kHz/50 kHz (100 kHz during auto search).
• AREA SA : When using in South American countries where FM interval
is 100 kHz. AM interval is set to 10 kHz.
• MONO ON : Activate monaural mode to improve FM reception, but
stereo effect will be lost, [8].
• MONO OFF : Restore the stereo effect.
• AUTO : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
• WIDE : Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect
will remain.
: Select one of the preset or user color for display and button (except EQ/
0
/ ) illumination.
(For customize color settings, "USER," see page 17.)
• OFF : Cancels.
• ON : Changes the display and button (except EQ/
illumination during menu, list search and playback mode
operations.
R06 – F06 : Adjust the front and rear speaker output balance.
(Initial: 00)
L06 – R06 : Adjust the left and right speaker output balance.
(Initial: 00)
• LOUD OFF : Cancels.
• LOUD ON : Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
0
/ )
Continued on the next page
15
SETTINGS