JVC GET0626-001A Instruction Manual page 22

Category Menu item
IF BAND
Intermediate
frequency band
BUTTON ZONE
DISP ZONE
Display zone
ALL ZONE
DAY COLOR
NIGHT COLOR
MENU COLOR
RING COLOR *
FADER *
BALANCE *
LOUD
Loudness
8
* Displayed only when Bluetooth adapter, KS-BTA200 is connected.
9
* If you are using a two-speaker system, set the fader level to "00."
10
* This adjustment will not affect the subwoofer output.
22 ENGLISH
• AUTO
• WIDE
COLOR 01 —
COLOR 29, USER
• BUTTON ZONE
• DISP ZONE
• BUTTON ZONE
• DISP ZONE
• ON
• OFF
8
• ON
• OFF
9
R06 – F06
[00]
10
L06 – R06
[00]
• LOUD ON
• LOUD OFF
Selectable setting, [
: Increases the tuner selectivity to reduce
interference noises between adjacent stations.
(Stereo effect may be lost.)
: Subject to interference noises from adjacent
stations, but sound quality will not be
degraded and the stereo effect will remain.
: For settings,
: For settings,
: For settings,
: For settings,
: For settings,
: Changes the display and buttons (except for 0
/ EQ BASS-TRE / DISP) illumination during menu,
list search and playback mode operations.
: Cancels.
: When a call comes in, the display will flash in
blue.
• The display will change to the original color
when the call is answered or the incoming
call stops.
When the unit receives a text message, the
display only illuminate in blue.
: Cancels.
: Adjust the front and rear speaker output
balance.
: Adjust the left and right speaker output
balance.
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
]
Initial: Underlined
24. [ COLOR 06 ]
24. [ COLOR 01 ]
24. [ COLOR 06 ]
24, 25.
24, 25.