aquacraftmodels.com INSTRUCTION MANUAL WARNING Never attempt to swim after a stalled R/C boat. Never operate your R/C boat while standing in the water. Never operate your R/C boat in the presence of swimmers. Always use a Personal Flotation Device (PFD) when boarding and operating your retrieval craft, i.e.
Outside the USA and Canada, contact your local importer for warranty information. HOBBY SERVICES Ph: (217) 398-0007 3002 N. Apollo Drive, Suite 1 9:00 am - 5:00 pm Champaign, Illinois 61822 Central Time M-F E-mail: hobbyservices@hobbico.com...
Page 3
Assembly HULL AND LIGHTING SYSTEM Install two new “AA” batteries into the lighting system battery holder. Be sure to follow the positive (+) and negative (–) pattern molded into the the battery holder. Pull the cabin latch forward. The lighting system has its own power switch. Turn the power on to illuminate the running and cabin lights.
Using CA, glue the peg on the bottom of the antenna into the Plug the battery pack into the boat’s ESC (Electronic Speed hole in the lightmast. Control) battery connector. Do not force them together; they are designed to fi t together only one way. WARNING: Unplug the battery any time the boat is not in use.
Before Launching Your Rescue 17 ● NEVER attempt to swim after a stalled or capsized boat! Wait patiently for the currents to return the boat to shore. ● R/C models produce vibrations which can cause screws on your model to become loose over time. It is important to make sure that all hardware is secure before operating your model.
If you need assistance locating a dealer to purchase parts, visit www.aquacraftmodels.com and click on “Where to buy”. If you are missing parts, contact Hobbico Product Safety Precautions Support at: ●...
Need help?
Do you have a question about the Rescue17 and is the answer not in the manual?
Questions and answers