Frequently Asked Questions - InFocus Projector Setup Manual

Frequently Asked Questions

How do I reset my Apple iPod?
To reset Apple iPod:
1. Connect the iPod to a power outlet using the iPod Power
Adapter.
2. Toggle the Hold switch on and off (set it to Hold, then turn it off
again).
3. Press and hold the Select and Menu buttons for at least 6
seconds, until the Apple logo appears.
Which cable provides me with the best video quality?
Connector Type
Composite
S-video
Why is there a folder with an Exclamation Point on the iPod
Display or projector?
• iPod may need to be reset (see above for instructions)
• Your iPod battery may need to be recharged.
At what cable length do I lose video quality?
The answer depends on the quality of cabling you use. Some cables
begin to lose noticeable quality beyond 10 feet. Higher quality cables
can maintain a clean signal beyond 25 feet. To guarantee the best video
quality, we recommend using heavy duty shielded cabling (for example
Monster Cable or Belkin). Use as short a cable as your setup allows.
Copyright © 1999-2005 InFocus Corporation. All Rights Reserved.
Quality Signal Type
Analog, standard
Good
definition
Analog, standard
Better
definition
How do I start a slideshow on my iPod?
1. Navigate to Photos from the main menu of the iPod, and then choose
the photos that you want to watch.
2. Click the Select button two times to display the Start Slideshow
menu.
3. You will be given the TV Off or TV On options. If you want to watch
the slideshow on your iPod, choose TV Off, or choose TV On for
your projector.
4. When the slideshow is finished, click the Menu button to stop the
slideshow.
How do I change the slideshow settings on my iPod?
You change the slideshow settings in the Slideshow Settings menu. From
this screen, you can choose music to play during the slideshow, decide
whether to repeat or shuffle photos, turn on transitions, and set up your TV to
show the slideshow.
7