Throwing Distance - Sony SRX-T110 Product Introduction

NOTE
1. When a lamp explodes, its fragments will possibly come out from the ventilation holes. For sake of
safety, the minimum 2m of clearance area as above is required. If such a area cannot be secured,
make sure that LKRA-001 is used to have the projector connected to the external exhaust duct.
Angle projection
When the projector is installed at +/- 90 degrees as in the below illustration, attach a mounting platform to
the projector, which can move the projector to 0 degree angle.
NOTE
1. When the projector is installed at +/- 90 degrees, connect the projector to the external exhaust duct
with the optional LKRA-001. When attaching the adaptor, be sure to provide enough room for
smooth exhaust flow and take care not to bend the duct.
9.7.

Throwing distance

A : Distance between the floor and the feet of the projector
A=B-310mm
·······································································································································································································
© Sony Professional Solutions Europe, Revised [date]
Sony Product Information
Category: [SXRD]
Product: [SRX-T110/T105]
17 of 20