Competitive Analysis; Product Features; Million Pixel Resolution At 4096 X 2160; High Brightness And Contrast Ratio - Sony SRX-T110 Product Introduction

5. Competitive Analysis

Based on its propriety LCOS technology, JVC announced its 4K projector development, and the product
release is expected later this year. This projector is also OEMed to Barco with slight difference in brightness.
The ultra high resolution of the SRX projectors is the biggest factor to attract the customers in high-end
visualization/simulation customers, so that in this section we will discuss comparison between SRX-T105 and
JVC/Barco 4K projectors.
Advantages of Sony 4K SXRD projectors are;
- Higher brightness; 11klm and 5.5klm models
- Compability of variety of signals;
*Barco/JVC projector accepts only progressive signals via DVI-D inputs.
The external signal processor boxes will be separately introduced to cope
with a variety of signals.
- Track record
* More than 350 units of SRX-R1xx/S1xx series have been sold world-wide in
Outside D-cinema market.

6. Product Features

Added to the features and convenient functions from the previous models, the SRX-T110/T105 have further
improvements for better operability of the projectors.
6.1.

8.8 million pixel resolution at 4096 x 2160

Thanks to the SXRD panel technology, a native resolution of 4096 x 2160 pixels can be achieved. The
projectors thus can deliver huge amount of image data on a large screen.
6.2.

High brightness and contrast ratio

The newly designed optical unit enables the projectors to achieve the higher brightness and contrast ratio,
compared with the predecessor models. The typical brightness of the new projectors are 11K lumen for
SRX-T110 and 5.5K lm for SRX-T105 while the typical contrast ratio is 2500:1.
6.3.

Accurate color reproduction with wide color space

Thanks to the xenon lamp used in the projector, the SRX-T110/T105 have wide color space to assure the
accurate color reproduction, and also offer rich tone of color. To maximize its color reproduction capability,
the projector provides color space selection and gamma curve selection, making it possible to set the
projector conditions properly according to the operation needs.
a. When an input signal to analogue RGB card LKRI-001 or 4:2:2 HD SDI card LKRI-002 is selected;
Color space : sRGB(ITU 709), DCDM, Adobe RGB*
Gamma : 1.8, 2.2, or custom value which is to be manually set from 1.8 to
2.59 by 0.01 value
b. When an input signal to 4:4:4 HD SDI card LKRI-003 is selected;
Color space : sRGB(ITU 709), DCDM, CIE-XYZ
Gamma : 1.8, 2.2, or custom value which is to be manually set from 1.8 to
2.59 by 0.01 value
c. When an input signal to DVI-D card LKRI-004 or LKRI-005 is selected;
Color space : sRGB(ITU 709), DCDM, Adobe RGB
Gamma : 1.8, 2.2, or custom value which is to be manually set from 1.8 to
2.59 by 0.01 value
·······································································································································································································
© Sony Professional Solutions Europe, Revised [date]
Sony Product Information
Category: [SXRD]
Product: [SRX-T110/T105]
5 of 20