Optional Lenses; Throwing Distance - Sony VPL-PX35 Specification Sheet

Flexibility
The Benefits of Networking
The VPL-PX40/PX35 can even be controlled via a TCP/IP-
based network connection, which also enables users to
receive maintenance information. This functionality is
ideal for offices and schools equipped with a Local Area
Network (LAN).
Back-to-Front Tilt
The VPL-PX40/PX35 can be tilted
upwards or downwards by 90 degrees.
This flexibility greatly expands the
projector's application possibilities.
Digital Keystone Adjustment
Keystone distortion, caused when the projection angle is
not properly calibrated, can be easily corrected within a
wide adjustment range of +/- 20 degrees. The necessary
adjustments can be easily made via the On-Screen Display.
On-Screen Display (OSD)
The OSD, which provides
easy projector control, is
available in a choice of nine
languages: English, French,
Spanish, German, Italian,
Japanese, Chinese,
Portuguese, or Korean.
Direct Power On and Off
With this function, standby mode can be skipped over
to activate the VPL-PX40/PX35 immediately. And thanks
to a cooling fan with drive circuitry that works even after
the power has been cut, the projector can be turned on
or off using a circuit-breaker switch on a switchboard.
Password-Authentication System
This function restricts unauthorized use of the projector.
Once a password has been set, the VPL-PX40/PX35
cannot be used without it.

Optional Lenses

Two optional lenses are available, giving users the
ability to customize the VPL-PX40/PX35 to perfectly suit
any projection environment.
VPLL-FM22 VPLL-ZM102
Fixed short-focus lens
for Rear Projection
(Optical Axis Angle :
0 degree)
Throw ratio*: 0.9:1
*Throw ratio is the distance between the center of the projector lens and
the screen, divided by the screen width.

Throwing Distance

Floor Installation
x
a
Floor installation (Standard Lens)
a: distance between the screen to the center of the lens
b: distance between the floor and the center of the lens
c: distance between the floor and the bottom of the adjusters of the projector
x: free
* : Viewable area,measured diagonally
*
Screen Size 40-inch 80-inch 100-inch 150-inch 180-inch 200-inch 250-inch 300-inch
Minimum 1490 3040 3820
(58 7/8) (119 7/8) (150 3/8) (226 5/8) (272 3/8) (302 7/8) (379 1/8) (455 1/2)
a
Maximum 1890 3830 4800
(74 3/8) (150 3/4) (189) (284 1/2) (341 3/4)
x-305 x-610 x-762 x-1143
b
(x-12) (x-24) (x-30)
x-392 x-697 x-849 x-1230
c
(x-15 1/2) (x-27 1/2) (x-33 1/2) (x-48 1/2) (x-57 1/2) (x-63 1/2) (x-78 1/2) (x-93 1/2)
Ceiling Installation
b
PSS-610 Projector Suspension Support (not supplied)
Ceiling installation using the PSS-610
Projector Suspension Support (Standard Lens)
a': distance from the center of the upper ceiling mount bracket hole (rear) to the screen
b: distance between the ceiling and the surface of the mounting bracket
x: distance between the ceiling and the center of the screen
* : Viewable area,measured diagonally
*
Screen Size 80-inch 100-inch 120-inch 150-inch 180-inch 200-inch 250-inch 300-inch
Minimum 3350 4130 4900
(132 1/8) (162 5/8) (193 1/8) (238 7/8) (284 5/8) (315 1/8) (391 3/8) (467 5/8)
a'
Maximum 4140 5110 6080
(163) (201 1/4) (239 3/8) (296 3/4)
b+693 b+846 b+998 b+1227 b+1455 b+1608 b+1989 b+2370
x
(b+27 3/8) (b+33 3/8) (b+39 3/8) (b+48 3/8) (b+57 3/8) (b+63 3/8) (b+78 3/8) (b+93 3/8)
b 150/175/200/250/275/300mm (6, 7, 7 7/8, 9 7/8, 10 7/8, 11 7/8 inches) adjustable when using PSS-610
1.5-times zoom long-focus lens
Throw ratio*: 3.35-4.9:1
c b
Unit : mm(inches)
5750 6920 7690 9630 11570
7220 8680 9650 12070 14500
(380) (475 1/2) (571)
x-1372 x-1524 x-1905 x-2286
(x-45) (x-54) (x-60) (x-75 1/8) (x-90 1/8)
x-1459 x-1611 x-1992 x-2373
a'
x
Unit : mm(inches)
6070 7230 8000 9940 11880
7530 8990 9960 12380 14810
(354) (392 1/4) (487 3/4) (583 1/4)