InFocus Projectors Setup Manual page 8

Connecting an Apple PowerBook G4 (17-inch) to an InFocus projector with a VGA cable
Setup Requirements
Apple PowerBook G4 (17-inch) with DVI-I out port
Projector with M1 port
M1 to VGA/USB cable (6 ft, InFocus part #SP-DVI-A)
Apple DVI to VGA adapter (Apple part #M8754G/A)
1
S
OUT
Plug the Apple DVI-VGA
adapter into the DVI out port.
Plug the VGA connector into
the adapter.
2
ProjectorNet
M1-DA
Plug the M1-A connector into
the M1 port on the projector.
3
Power on the projector, then the
computer. If the image does not appear
on the screen, see Common
Copyright © 1999-2005 InFocus Corporation. All Rights Reserved.
Apple PowerBook G4 (17-inch) Connector Panel
connector panel may vary from actual product
USB connector for Microsoft PowerPoint
or mouse control with InFocus remote.
(Not required for projector use)
Composite
Video
RS-232
L
Projector Connector Panel
S-video R
connector panel may vary from actual product
ProjectorNet
M1-DA
A
Issues.
USB port
Composite
Video
RS-232
L
S-video
R
M1-A connector
Good
S
OUT
DVI-I port
Apple DVI-VGA adapter
VGA connector
M1 to VGA/USB cable (6 ft)
(InFocus standard accessory)
*
We recommend connecting the computer to external
speakers to provide the best audio experience.
8