InFocus Projectors Setup Manual page 2

Connecting an Apple iBook to an InFocus projector with a VGA cable
Setup Requirements
Apple iBook with Monitor/Video Out Port
Projector with M1 port
M1 to VGA/USB cable (6 ft, InFocus part #SP-DVI-A)
Apple VGA adapter (Apple part# M8639G/A)
1
Plug the Apple VGA adapter
into the monitor/video out port.
Plug the VGA connector into
the adapter.
2
ProjectorNet
M1-DA
Plug the M1-A connector into
the M1 port on the projector.
3
Power on the projector, then the
computer. If the image does not appear
on the screen, see Common
Copyright © 1999-2005 InFocus Corporation. All Rights Reserved.
Apple iBook Connector Panel
connector panel may vary from actual product
Composite
Video
USB connector for Microsoft PowerPoint
RS-232
L
or mouse control with InFocus remote.
S-video R
(Not required for projector use)
M1 to VGA/USB cable (6 ft)
(InFocus standard accessory)
Issues.
*
We recommend connecting the computer to external
speakers to provide the best audio experience.
Monitor/video out port
USB port
Connect to computer speakers or
projector (if supported).
Apple VGA adapter
VGA connector
Projector Connector Panel
connector panel may vary from actual product
ProjectorNet RS-232
M1-DA
A
*
Composite
Video
L
S-video R
M1-A connector
2