InFocus Projectors Setup Manual page 4

Connecting an Apple PowerBook G4 (12-inch/DVI) to an InFocus projector with a DVI cable
Setup Requirements
Apple PowerBook G4 (12-inch/DVI) with Mini-DVI out port
Projector with M1 port
M1 to DVI/USB cable (6 ft, InFocus part #SP-DVI-D)
Apple Mini-DVI to DVI adapter (Apple part #M9321G/A)
1
Plug the Apple DVI adapter
into the mini-DVI out port.
Plug the DVI connector into the
adapter.
2
ProjectorNet
M1-DA
Plug the M1-D connector into
the M1 port on the projector.
3
Power on the projector, then the
computer. If the image does not appear
on the screen, see Common Issues.
Copyright © 1999-2005 InFocus Corporation. All Rights Reserved.
Apple PowerBook G4 (12-inch/DVI) Connector Panel
connector panel may vary from actual product
USB port
Composite
Video
RS-232 USB connector for Microsoft PowerPoint
L
or mouse control with InFocus remote.
S-video R
(Not required for projector use)
M1 to DVI/USB cable (6 ft)
(InFocus optional accessory)
*
We recommend connecting the computer to external
speakers to provide the best audio experience.
Connect to computer speakers or
Mini-DVI out port
projector (if supported).
Apple DVI adapter
DVI connector
Projector Connector Panel
connector panel may vary from actual product
ProjectorNet RS-232
M1-DA S-video
D
Better
*
Composite
Video
L
R
M1-D connector
4