Storage Recommendations; Maintain Tools With Care; Problem Solution - Worx WG151 User Manual

cycles the battery will accept a 100% charge.
4. It must be charged for 12 hours before using
the first time!
5. The normal charging time lasts about 3-5
hours. When charging is completed, unplug
the charging plug form the wall socket.
WArNINg: Shock hazard. Don't allow
any liquid to get inside charger. Electric
shock may be the result.
CAutIoN: Never attempt to open the battery
pack for any reason. If the plastic housing of
the battery pack breaks or cracks, return to a
service center for recycling.

StorAgE rECoMMENdAtIoNS

1. The best storage place is one that is cool and
dry away from direct sunlight and excess heat
or cold.
2. If the battery pack will not be used for a
long time, it is best to make sure it is properly
stored. Make sure it is half or fully charged
before storing. The battery should be stored
in an area that maintains a temperature of
approximately 65°F and 75°F (18°- 24°C).
Long term exposures to hot temperatures
10 10
are hazardous to the battery packs life.
Additionally, the battery pack should be
charged at least once a year.

PROBLEM SOLUTION

1. I CANNot FIt thE BAttEry INto thE
BAttEry ChArgEr. Why?
The battery can be inserted into the charger
base only in one direction. Turn the battery
around until it can be inserted into the slot, the
red light should turn on when the battery is
charging.
2. rEASoNS For dIFFErENt ChArgINg
tIMES
The charging time can be affected by many
reasons which are not defects in your product.
1) If the battery pack is only partly discharged it
may be re-charged in less than 3-5hours.
2) If the battery pack and ambient temperature
are very cold then re-charging may take more
hours.
3) If the battery pack is very hot you must
remove your battery pack from the charger
Battery charger
and allow your battery pack to cool first to
ambient temperature and then recharging can
be started.
MAINTAIN TOOLS WITH
CARE
remove the plug from the electrical
socket before carrying out any
adjustment, servicing or maintenance.
Your tool requires no additional lubrication
or maintenance. Never use water or chemical
cleaners to clean your tool. Wipe clean with a
dry cloth. Always store your tool in a dry place.
EN